DOP-103 BQ

Rp 4.250.304

Description

Display4.3″ TFT LCD
Color16-bit
Resolution480 x 272
Back LightLED Back Light
Back Light Brigness400
Back Light Life20,000
Display Area95.04 x 53.856 mm
MCUARM Cortex-A8 (800 MHz)
Flash ROM256 MB
RAM256 MB
Touch PanelFour-wire resistor, over 10,000,000 pressing times
BuzzerMulti-Tone Frequency (2K ~ 4K Hz) / 80 dB
Ethernet InterfaceN/A
USB1 USB Slave Ver 2.0 / 1 USB Host Ver 2.0
SDN / A
COM1RS-232 (supports hardware flow control) / RS-485
COM2RS-422 / RS-485
COM3N/A
RTCBuilt-in
CoolingNatural air circulation
CertificationCE / UL (please use shielding Ethernet cables and magnetic rings with filters of 300 ohm / 100 MHz)
WaterproofIP65 / NEMA4 / UL Type 4X (indoor use only)
Operating VoltageDC +24V (-15% ~ 15%), supplied by Class 2 or SELV circuit (isolated from MAINS by double insulation)
Voltage EnduranceAC500 V for 1 minute (between charging DC24 terminal and FG terminals)
Power ComsumptionMax. 5.67 W
Backup Battery3V lithium battery CR2032 × 1
Backup Battery LifeDepends on the temperature used and the conditions of usage, usually about 3 years or more at 25° C
Operation Temperature0 oC ~ 50 oC
Storage Temperature-20 oC ~ 60 oC
Ambient Humidity10% ~ 90% RH (0 ~ 40 oC), 10% ~ 55% RH (41 ~ 50 oC), Pollution Degree 2
ViberationIEC 61131-2 compliant 5 Hz ~ 8.3 Hz = Continuous: 3.5 mm, 8.3 Hz ~ 150 Hz = Continuous: 1 g
ShockIEC 60068-2-27 compliant 15 g peak for 11 ms duration, X, Y, Z, directions for 6 times
Dimention (W x H x D) mm137 x 103 x 37.1
Mounting Dimensions118.8 x 92.8
Weight280 g

Reviews

There are no reviews yet.

Be the first to review “DOP-103 BQ”

Your email address will not be published. Required fields are marked *