| Display | 7″ TFT LCD |
| Color | 16-bit |
| Resolution | 800 x 480 |
| Back Light | LED Back Light |
| Back Light Brigness | 400 |
| Back Light Life | 10,000 |
| Display Area | 152.4 x 91.44 mm |
| MCU | ARM Cortex-A8 (800 MHz) |
| Flash ROM | 256 MB |
| RAM | 256 MB |
| Touch Panel | Four-wire resistor, over 10,000,000 pressing times |
| Buzzer | Multi-Tone Frequency (2K ~ 4K Hz) / 80 dB |
| Ethernet Interface | 1 Port, 10/100 Mbps auto-sensing |
| USB | 1 USB Slave Ver 2.0 / 1 USB Host Ver 2.0 |
| SD | N / A |
| COM1 | RS-232 (supports hardware flow control) |
| COM2 | RS-232 (supports hardware flow control) / RS-485 |
| COM3 | RS-232 (supports hardware flow control) / RS-422 / RS-485 |
| RTC | Built-in |
| Cooling | Natural air circulation |
| Certification | CE / UL (please use shielding Ethernet cables and magnetic rings with filters of 300 ohm / 100 MHz) |
| Waterproof | IP65 / NEMA4 (indoor use only) (110IG with UL Type 4X) |
| Operating Voltage | DC +24V (-15% ~ 15%), supplied by Class 2 or SELV circuit (isolated from MAINS by double insulation) |
| Voltage Endurance | AC500 V for 1 minute (between charging DC24 terminal and FG terminals) |
| Power Comsumption | Max. 12 W |
| Backup Battery | 3V lithium battery CR2032 × 1 |
| Backup Battery Life | Depends on the temperature used and the conditions of usage, usually about 3 years or more at 25° C |
| Operation Temperature | 0 oC ~ 50 oC |
| Storage Temperature | -20 oC ~ 60 oC |
| Ambient Humidity | 10% ~ 90% RH (0 ~ 40 oC), 10% ~ 55% RH (41 ~ 50 oC), Pollution Degree 2 |
| Viberation | IEC 61131-2 compliant 5 Hz ~ 8.3 Hz = Continuous: 3.5 mm, 8.3 Hz ~ 150 Hz = Continuous: 1 g |
| Shock | IEC 60068-2-27 compliant 15 g peak for 11 ms duration, X, Y, Z, directions for 6 times |
| Dimention (W x H x D) mm | 215 x 161 x 61.2 |
| Mounting Dimensions | 196.9 x 142.9 |
| Weight | 970 g |
Reviews
There are no reviews yet.